Accumulating dirt and debris at the bottom of your pool, you need not only a pump but also a vacuum to clean it. Without a vacuum, you can not think how to clean at the bottom of the pool. Your pool is always threatened by dirt, debris, and algae in the bottom and upper side of the pool.
It is your routine work to clean and maintenance to run the pool pump. But this is not enough to keep you satisfied. You need more because you want a perfect pool to swim in. We know that skimmer is only suitable for removing leaves, dirt, and debris. And those things are floating on the surface label of the water. What about those things, are you staying at the bottom of the pool? It is a first-class idea to use a vacuum your pool with filter.
Most of the debris floats on a pool for 3-4 hours, but after these sinks into the water with sand. A vacuum is a standard gadget to relieve you. It is an product to work underwater. On the other side, you can not remove by using skimmers and do not work to the bottom and the sides of the pool. A vacuum is a complete solution to solve this problem if you want. A pool vacuum works with two valve settings in the sand filter depended on the level of the water part. It is better to vacuum your pool at least once a week.
How to Vacuum Pool with Sand Filter
You have to use a sand filter to vacuum the surface label of your pool. So follow these processes and tips on how to vacuum with sand filter.
Remove large debris and leave: Use a scoop net to remove large leave and debris that might block the vacuum hose pipe and head.
Attach the telescopic pole: Attach the telescopic pole and hose pipe with vacuum head before you vacuum the pool.
Fill the Hose Pipe with water: Before submerging the hose pipe, allow it to flood with water. It removes an air block trapped into the hose pipe.
Vacuum the Pool: After that, you should move the vacuum head slowly and consciously through the bottom and side of the pool. Finishing vacuum the pool disconnect the hose pipe from the skimmer.
Turn off the Pump: Then you will turn off the pump.
Backwash: turn the filter valve to the Backwash position, when the sand filter block with debris, dirt, leaves, and algae, then the Backwash reverses all of these things via the ground or drain.
Rinse position: Turn the filter valve to the Rinse position. You will turn on the pump and run the rinse process for 1 or 2 minutes.
These processes are not easy. It will take a little bit of time, but you have to do all of these things properly.
The Vacuum Process
A pool vacuum operates the vacuum head near to the vacuum skimmer line. Then the vacuum constructs by the circulation pump to the skimmer line and towards the pump at negative pressure. After that, it pumps at positive pressure by using a sand filter and delivers it to the pool throughout the return line.
Force down the hose into the skimmer draft after the vacuum hose filled with water.
When the vacuum head is rotated to the bottom and side of the pool, it will suck all the dirt and other debris. After that, you should observe there any dirt or debris, then deliver the sand filter into the water.
If you want to use a sand filter with your vacuum filtration process, you will need a proper setting. Usually, these types of filter systems have multiple setting such as rinse, recirculation, backwash, waste, and filter, or closed.
Filter setting is the most common that you will handle with minimum debris were no visible algae. Choose the waste setting when your pool is dirtier than average. Running it properly, you should follow manufacturers’ instructions for clean and backwashing. It varies important to understand which setting is more suitable for cleaning with a lot of algae or debris and removes the sand from the pool.
Tools you need for vacuum manually
When you vacuum your pool manually, you need something I recommend bellow.
Pool vacuum head: First, you need a vacuum head. It should be weighted so that it can stay on the bottom of the pool without floating. It will make you easy to end the cleaning surface of the pool.
Telescoping pole: This kind of tool makes you sure that you can reach the bottom of the deepest area where you need to clean. Sometimes, it extends your reach 7.5 to 20 feet with a 3-stage telescoping extension pole. This pole connects to the pool skimmers with nets and hooks also.
Vacuum hose: You will need a vacuum hose; it makes you sure that you can reach every area of the pool where a vacuum can clean.
How to Vacuum Your Pool Manually
Though you have all of these types of equipment, you do not know how to deal with it. So follow us, it will save you time and energy.
Prime your vacuum: Firstly, you need to remove all the air from the vacuum system that is more important to your vacuum. The air pocket can lose your unit suction, so remove it from the vacuum to keep it longer. To do this, snap the vacuum head over the telescoping pole and let it go down to the bottom of the pool. Then you will see air bubbles floating from the vacuum head.
Connect to the pump: Your vacuum system works by connecting to a schemer inlet driven by the suction of the pool conduction pump. You will get to remove the strainer basket before you attach the open end of the hose to the inlet.
Vacuum your pool: New; you should turn on and move the vacuum head on the surface of the pool until it’s clean. It will provide suction for the vacuum hose, which allows you to vacuum the bottom of your pool with a vacuum head.
If you want, you can attach a skimmer vacuum plate, which designed to go on the end of the hose and cover the pool. It makes you a secure connection.
It varies crucial that a good filtration system is needed for you to clean your pool. You can choose a better tool to do it, and it will be fantastic to keep your pool sparkling, clean, and clear. You will need to use any cleaning method at least once a week. So you can choose an automatic pool cleaner, which is a worthy investment to save your time and energy.