How to Hook up Pool Vacuum to Intex Pump?

The summary season is finally back & you may have called your friends or family members to enjoy dipping in your pool.

During this get-together, the only hassle may thump at your entryway is keeping the pool clean from dirt & algae. This issue is so serious that it may make you feel like why you’re owning this creepy shit!

However, a pool vacuum may come in handy here as it provides you a snappy and easy vacuuming experience. Alright, you are savvy enough, and that is the reason you may have just bought one.

If I am not wrong, you are now wondering how to hook up the pool vacuum to the Intex pump?

If so, then you have chosen the right door to knock out because I will give you some precise knowledge regarding this.

How to Hook up Pool Vacuum to Intex Pump

Prerequisites

Now look, before jumping into the steps, you should know some nuts and bolts regarding the process.  In the following, I will give you in- short view about everything.

The filter pump

First off, you should run the filter pump rapid. Like the speed should go between 1600-3500 gallons.

Why?

Because , it will not only make your cleaning job easier but also clear away the dirt & debris from the pool.

Another hassle the pool owner often undergoes is with the water inside; it gets dirty & stale. Streaming the water at our previously mentioned rate will keep the water new, and accordingly, don’t let the water get lifeless.

So, focus on it.

Next question people often asked; what setting should my filter be on when vacuuming a pool?

Well, you should set the filter valve to the “normal filter” position; it will eliminate contaminated water from the pool. Besides, it will also direct the water back to the pool. This setting is most preferable for light, moderate sedimentary levels.

Clean the sand filter

You should keep the sand filter always clean to get the optimum result. For this, you need to backwash the filter. Many of us don’t have much idea about the process. Here is how you will do it.

  • It would be best if you stopped the pump first.
  • Then, you have to close the valve, both the suction & return line.
  • From that point onward, you need to open the cover of the siphon and void the channel bin.
  • Again keep the cover in position.
  • You have to deplete the source, so open the valve.
  • Now press the lever ” Backwash “.
  • In opposed to number two, you have to open the valve both “suction & return line “.
  • After starting the pump, you need  to rinse the filter for a few minutes.   It would help if you continued it until the water in the sight glass is clear.
  • Now stop.
  • It would then be best if you pushed the rinse lever to rinse for 15-30 sec; that time,must keep the pump in start mode. As a part of the normal operating systems, you need to turn the lever to “Filter” mode.
  • It’s time to close the drain outlet valve & switch on the electric heater.

Tools in need

While hooking the pool vacuum to the Intex pump, you should set the tool in the following order :

  • Pool vacuum head
  • Telescoping pole
  • Vacuum hose
  • Skim vac

A Step by Step Guideline on How to Hook up Pool Vacuum to Intex Pump

Step 1: Now, you may be well acquainted with the parts of the pool. You need to adjust the garden hose with a house spigot. Sometimes, it might be extreme to arrive at the farthest corner of your pool since the hose may fall short of length. So, you should check the length initially. If you bring a longer one, then you don’t have to worry about stretching it anymore.

Step 2: In this part, you need to locate the telescoping pole. You will get to see two pieces that you have to insert with one another properly.

Step 3: After doing number two, you should move forward to align the vacuum head and the spring. While carrying them to align, you have to press them else they may not come to adjust.

This is a significant step, so perform it cautiously. Now, attach a dirtbag with the vacuum head & tie it carefully.

Step 4: In this phase, you need to attach the vacuum head with the adapter nozzle.

Something else you should be cautious about clipping the hose with the telescoping pole. Now, you should wind the hose on the nozzle. The next step is locating the adapter to coupling with the garden hose.

Now you are ready to go…

A few of us may see it as a  hassle since you have to go through some instructions. You can manually do the same things.

Do you want to know how? Then, without looking back & forth, check out the next segment.

How can I vacuum my pool without a pump?

It’s a holiday & you are wanting to enjoy the summer with family & friends in the pool. Keep your fun aside; what about bringing the waste out of the water?

Well, the pool filter may come in handy this time since it can handle a huge amount of debris.

And the best part is you don’t have to change the filter frequently. All you need is to measure your pool size & set up one or two filters accordingly.

You can even go for multiple filters as they offer special settings to prevent debris or algae from getting clogged with the filter. If you go with this method; there is a huge possibility that the water level may drop as you vacuum.

However, you can fix this situation by using a garden hose attached with a hose filter. Thus, you will be able to balance the level.

Conclusion

This is all about how to hook up the pool vacuum to the Intex pump. Hopefully, you have read our article thoroughly & get a clear idea about the parts & set up. I can claim that after reading this in-depth researched piece, you will fix everything by yourself. On the off chance that you discover any issue, at that point hold there, read this bit of directions and work likewise. Have fun!

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.