How often do you run your pool pump? If you don’t have a saltwater system running, it’s likely that you may not be running it at all. Salt water is an expensive investment for many pools and the expense doesn’t end when installing the equipment. The cost of operation can also add up to hundreds or even thousands of dollars each year!
To make sure that your saltwater pool pump is operating as efficiently as possible, we’ve compiled some helpful information on how often one should run their pump and what time of day would be best to operate them during different seasons.
Best Time to Run Saltwater Pool Pump
- 1 Best Time to Run Saltwater Pool Pump
There is no set time of the day that you should be running your pool pump. It depends on how often and what kind of use your swimming pool sees. For example, if you have kids who come over during summer vacation to swim for a couple hours in between naps then it would probably make sense to run your saltwater filter overnight while they sleep because as soon as they wake up and start playing again at around 11 am or so (after getting some much needed rest), it could produce too much chlorine which isn’t good for their skin – this is just one scenario where it might be best to turn off the filtration system when not being used and replace with a more natural alternative like an ozone generator.
How many hours a day should I run my saltwater pool pump?
Knowing how many hours per day is best for your saltwater pool pump will help cut down on energy costs and maintain appropriate levels of chlorine in the pools water at all times.
Specifically, running these pumps between eight and twelve hours per day helps ensure that there are always adequate amounts of chlorine present to keep bacteria from developing as well as protect against algae growth during warmer months (summer). But if you are running your pump for longer than this recommended time frame then we recommend shutting off all equipment and cleaning filters before restarting to avoid clogging.
If you have a salt system with two pumps: run one pump at least three times per week and make sure both pumps get equal coverage on alternating days or weeks. If not, the pool may experience uneven water levels (usually higher), difficulty maintaining desired chlorine levels, cloudy water due to bacteria growth from standing too long, and increased chemical usage as opposed to using just one filter – which means more money spent!
If you have a solar powered system, run it when the sun is shinning on you panels. You can also set up an automatic timer to turn it off and on at specific times of day or days of the week.
In general: running your pump too much may cause cloudy water due to bacteria growth from standing too long, higher chemical usage as opposed to using just one filter – which means more money spent!
Best time to run saltwater pool pump in summer
The best time to run your pool pump in the summer is during peak hours of sun exposure. This will help with evaporation so that you won’t need to manually evaporate water as often.
Best time to run saltwater pool pump in Winter
During winter, pools are at their lowest usage level and most people turn off their pumps for a few months. The optimal operating times would be after sunset when there’s less sunlight on the surface area of the swimming pool; this helps minimize algae growth because there’s not enough light present for photosynthesis processes. In addition, it also promotes bacteria growth which means better sanitation! You should keep your filter running all day long (assuming you have a timer) until nightfall.
How many hours a day should I run my saltwater pool pump?
It’s really up to you. If your swimming pool is being used on the regular, it might be best for you to set your timer at 12-14 hours per day because this will ensure that there isn’t too much algae or bacteria growth occurring in between filter cycles. However, if your pool is not being used often and only when kids visit grandparents during summer vacation, then an operating time of about six hours would suffice (assuming you have a timer). The optimal amount of time can change depending on how we use our pools so make sure to consider what works best for yours!
How to minimize the costs of running your salt water pool pump
Here are some helpful tips to minimize the costs of running your salt water pool pump:
- Purchase a high efficiency motor that will shut off when not being used. This will save you money on electricity and also extend the life expectancy of the equipment.
- Run it only during periods with heavy foot traffic. Be aware that if run for too long, this could produce too much chlorine which isn’t good for their skin. A plugged pipe can cause damage to pumps so be sure to replace any filter cartridge or hoses as needed!
- When the pool isn’t in use, turn off your pump as it will only waste energy and be a source of noise for you or others around. Reduce chlorine usage by lowering the water level to about four inches on top of the skimmer – this way dirt, leaves, sticks can gather there instead of clogging up pumps! If needed increase chlorine levels using tablets at least once per week but never more than three times per day.
Salt water pool pumps are an expensive investment that require a lot of upkeep and maintenance in order to maintain efficiency and extend lifespan. But when you know the best time to run a salt water pool pump, it makes that process much easier.
A common misconception about saltwater pool pumps is they only need to be turned on before swim sessions – this couldn’t be further from true!
In reality, because they may accumulate debris from hair and soap residue over time – this can cause problems with the pump’s operation.